Building an RTP proxy using Spring

Originally published here.

I have been really into understanding more about how audio/video streamings work. One piece of that world is RTP. It is defined in RFC 3550, which I read but I don’t actually understand things until I see them working for myself, so let’s do that. This is what we are building:

ffmpeg generates an RTP stream from an audio file

The RTP receiver consumes that stream, creating a websocket stream from it and sending it to the websocket server

The websocket server consumes the stream and writes it to a file

The code for this experiment can be found at https://github.com/lucaspin/spring-replication-proxy.

The RTP header structure

Here’s the RTP header structure, from the RFC:

+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|V=2|P|X|  CC   |M|     PT      |       sequence number         |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                           timestamp                           |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|           synchronization source (SSRC) identifier            |
+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
|            contributing source (CSRC) identifiers             |
|                             ....                              |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

A few things to note there:

version (V): the first two bytes in the packet. This is always 2, at least until someone comes up with a newer version of RTP. Food for thought: as just 2 bits are used for this, would it only be possible for a version 3 to exist?

contributing sources count (CC): works together with the CSRC identifiers part of the header, defining how many of those we’ll have in the packet. As only 4 bits are used for this, the maximum number of CSRC identifiers we can have is 15.

payload type (PT): the format that the media in this packet uses. This only makes sense in the context of a profile. RFC 3551 defines a good example of one. The profile defines which values map to which formats. The payload type can be static or dynamic. For a static payload type, you just need to know which profile the sender is using and you’re good. For a dynamic payload type, you need the profile and something else to know the format. Usually, an SDP description is that “something else”.

sequence number: the sender puts sequence numbers on all packets before sending them, so that the receiver can recompose the media packets in the correct order. Later on, you’ll be able to hear why that is important.

timestamp: Why would you need a sequence number and a timestamp?

SSRC identifier: synchronization source; a unique id used to distinguish media streams coming from different sources.

CSRC identifiers: contributing sources; a way of RTP translators to keep the original sources that were mixed into the same media stream.

The P (padding), X (extension) and M (marker) fields are flags to indicate changes in how the packet is structured, and are not really important for us right now. So, the RTP header can be defined as this:

public class RTPPacket {
    private final int version;
    private final boolean padding;
    private final boolean extension;
    private final int contributingSourcesCount;
    private final boolean marker;
    private final int payloadType;
    private final int sequenceNumber;
    private final int timestamp;
    private final int synchronizationSourceId;
    private final byte[] payload;
}

Parsing the header

If you’re like me and doesn’t speak binary fluently, you’ll need some little reminders on how to manipulate bits to grab the information you want.

For instance, we want to grab the version of the packet. We know that field takes the first two bits of the first byte of the packet. But the first byte also has three other fields. How do we get just the version then? Using the AND and SHIFT bitwise operations.

Let’s say that the first byte is 10010010. In order to grab just the first two leftmost bits, we need to “erase” the other six bits. In order to do that, we can use an AND operation where the bits in the same position as the ones we want to erase are 0:

10010010
     AND 11000000
     ------------
         10000000

Remember: ANDing anything with 0 gives you 0. Now we zeroed them out, but the bits we want are still in the leftmost position. Now, we shift them right 6 times:

10000000
         --------
    (1x) 01000000
    (2x) 00100000
    (3x) 00010000
    (4x) 00001000
    (5x) 00000100
    (6x) 00000010

Now, we have 00000010, or 2 in the fantastic decimal system. With that idea in mind, let’s create a parsePacket() method to transform an array of bytes into an RTPPacket object:

public static RTPPacket parsePacket(byte[] packet) {
    return RTPPacket.builder()
        .version((packet[0] & 0b11000000) >>> 6)
        .padding(((packet[0] & 0b00100000) >> 5) == 1)
        .extension(((packet[0] & 0b00010000) >> 4) == 1)
        .contributingSourcesCount(packet[0] & 0b00001111)
        .marker(((packet[1] & 0b10000000) >> 7) == 1)
        .payloadType(packet[1] & 0b01111111)
        .sequenceNumber(ByteBuffer.wrap(packet, 2, 2).getShort())
        .timestamp(ByteBuffer.wrap(packet, 4, 4).getInt())
        .synchronizationSourceId(ByteBuffer.wrap(packet, 8, 4).getInt())
        .payload(Arrays.copyOfRange(packet, 12, packet.length))
        .build();
}

The UDP inbound receiver

As we’re only interested in understanding RTP, let’s let Spring take care of the UDP complexity for us. Spring has support for TCP and UDP and here is how you create a UDP inbound receiver on port 11111 with it:

IntegrationFlows.from(new UnicastReceivingChannelAdapter(11111))
    .handle(new RTPMessageHandler(rtpManager))
    .get();

The RTPMessageHandler class extends Spring’s AbstractMessageHandler and does just two things:

Parses the RTP packet

Forwards it to our RTPManager

public class RTPMessageHandler extends AbstractMessageHandler {
    private final RTPManager rtpManager;

    @Override
    protected void handleMessageInternal(Message<?> message) {
        RTPPacket packet = parsePacket((byte[]) message.getPayload());
        rtpManager.onPacketReceived(packet);
    }
}

The RTPManager is the one responsible for a very fundamental part of an RTP receiver using UDP: packet reordering.

Packet reordering

RTP may be used over TCP (less common) or UDP (more common). As it doesn’t rely on the delivery order correctness that might be provided by the transport protocol, it needs a way to sequence packets. And that’s why the RTP header has a sequence number on it. The RTP receiver that will play the media stream needs to reorder the packets received, otherwise the media will not sound/look very nice. In our example, we won’t be playing it, but the consumer of the WebSocket will, so we need to reorder the packets for them.

The RTPManager will be responsible for two things:

Reordering packets before sending them through the websocket

Grouping the packets that come in by SSRC id

public class RTPManager {
    private final Map<Integer, SyncSourceStatus> syncSources = new HashMap<>();

    public synchronized void onPacketReceived(RTPPacket packet) {
        if (syncSources.containsKey(packet.getSynchronizationSourceId())) {
            SyncSourceStatus status = syncSources.get(packet.getSynchronizationSourceId());
            synchronized (status.getLock()) {
                status.addPacket(packet);
                if (status.getPackets().size() > MAX_PACKETS_BEFORE_FLUSHING) {
                    status.flush();
                }
            }
        } else {
            syncSources.put(packet.getSynchronizationSourceId(), SyncSourceStatus.builder()
                    .syncSourceId(packet.getSynchronizationSourceId())
                    .packets(new ArrayList<>(List.of(packet)))
                    .webSocket(initializeSocket())
                    .lock(new Object())
                    .build());
        }
    }
}

Here, I use another class called SyncSourceStatus, to help me with those things:

static class SyncSourceStatus {
    private int syncSourceId;
    private List<RTPPacket> packets;
    private Socket webSocket;
    private final Object lock;

    public void addPacket(RTPPacket packet) {
        packets.add(packet);
    }

    public void flush() {
        packets = packets.stream().sorted().collect(Collectors.toList());
        packets.forEach(packet -> webSocket.send(packet.getPayload()));
        packets = new ArrayList<>();
    }
}

Note that the SyncSourceStatus.flush() sorts the packets before sending them through the websocket, so we need to make our RTPPacket implement Comparable:

public class RTPPacket implements Comparable<RTPPacket> {
    // Fields and getters

    @Override
    public int compareTo(RTPPacket o) {
        return Integer.compare(getSequenceNumber(), o.getSequenceNumber());
    }
}

Bringing everything up

For our WebSocket server and client, we’ll use socket.io. Our server just grabs everything that comes from the websocket stream and saves it into a file:

const http = require('http').Server();
const fs = require('fs');
const io = require('socket.io')(http);

io.on('connection', (socket) => {
  const wstream = fs.createWriteStream('/tmp/audio-from-ffmpeg');

  socket.on('disconnect', () => {
    wstream.end();
  });

  socket.on('message', msg => {
    wstream.write(Buffer.from(msg));
  });
});

http.listen(4010, () => {
  console.log('listening on *:4010');
});

And we’ll use ffmpeg to generate the RTP stream that’ll be consumed by our RTP receiver:

ffmpeg \
    -re \
    -i media/pcm_s16le-44100hz-s16-10s.wav \
    -c:a copy \
    -f rtp \
    "rtp://127.0.0.1:11111"

Once the ffmpeg command exits, we can check the audio written to /tmp/audio-from-ffmpeg by the server and make sure it plays well.

Reorder or not to reorder

To illustrate why packet reordering is important:

Media stream replicated with packet reordering: https://lucaspin.github.io/public/media/reordering-yes.ogg

Media stream replicated without packet reordering: https://lucaspin.github.io/public/media/reordering-no.ogg

Big difference, huh? That’s why you need the sequence number field, because the RTP receiver needs a way to put the packets that arrive in the same order in which they were sent.

That’s all for today, thanks for reading!

Categories:

Java

Tags:

Java Spring Rtp

Building an RTP proxy using Spring

Categories:

Tags:

Related Posts